а нафик выставлять не реальные фото
shurass, спасибо, я как то не ожидал такой подвох
что-то не стал искать откуда фото , но даже на том форуме человеку однозначно написали то же что и я " Too many radios too close together for proper troubleshooting. " "Too many radios too close together for proper troubleshooting.
Having said that.... You have either an alignment issue or you have interference issues.
We have NBM5 @ 3.6miles, talking to a Rocket M5/Sector doing 117x117 (20mhz) air rate with a -72 signal, Chain 0 /Chain 1 is -80/-72, I know that the channel is not clean.
What I would suggest, if possible, turn the radios off, work with only one NBM5 at a time, and re-align first.. .
These things are very sensitive on alignment and also have a pretty strong side lobe... Very commonly folks are align them to the side lobe rather than the main lobe.
When aligning, expect something like this.(signal strength)... bad---good---bad---great... if you stop at the first good.. then you are on the side lobe. Do that one at a time on each side to get your alignment right.
Also when you have that right, I am betting that you will also have to turn the power down on the radios, cause the signal will be too hot ! "